10/4 VNTC Tray Cable Type TC-ER (THHN PVC 600V)

10 AWG 4-Conductor VNTC (Vinyl Nylon Tray Cable) without Ground (Black/Red/Blue/Orange Conductors) is a heavy-duty, multi-conductor industrial power, branch circuit, and machinery control cable engineered for installation in open cable trays, structural conduits, and commercial wireways. Comprising four standalone 10 AWG stranded bare copper conductors twisted into a balanced round core, this Type TC (Tray Cable) assembly utilizes high-performance THHN/THWN-2 insulation cores wrapped in a rugged, flame-retardant, and sunlight-resistant Polyvinyl Chloride (PVC) outer jacket.

This specific configuration utilizes Black, Red, Blue, and Orange insulation for explicit visual tracking across complex terminal strips. It provides a high-capacity, moisture-resistant wiring system optimized for 3-phase machinery networks requiring an additional ungrounded signaling leg, or for high-leg delta distribution paths where an independent structural grounding path—like metallic conduit or a structural tray system—is utilized.

AMPACITY RATINGS (NEC 310.16)

• 60°C Terminal Rating: 30 AMPS This is the baseline engineering safety rating. Use this value for final circuit sizing under normal operating conditions when connecting to legacy equipment terminals or standard breaker lugs restricted to 60°C constraints.

• 75°C Terminal Rating: 35 AMPS This is the standard engineering design rating. Use this value for most standard modern terminal blocks, motor starters, and electrical distribution equipment, as most modern industrial termination lugs are rated for 75°C constraints.

• 90°C Terminal Rating: 40 AMPS This is the maximum capacity rating. Use this value strictly as the baseline calculation factor when adjusting or derating for high ambient operating temperatures, or when bundling multiple tray cables together in tightly packed industrial raceways.

Key Features

• Industrial High-Leg / Multi-Phase Identification: Features Black, Red, Blue, and Orange conductors. This layout is ideal for identifying high-leg delta systems or keeping distinct track of a specialized fourth ungrounded leg, reducing field diagnostic errors.

• Industrial Round Profile Construction: Wires are twisted inside the jacket into a nested round layout, maximizing physical symmetry. This structural design ensures uniform pulling tension, high physical strength, and smooth feeding through multi-bend conduit runs.

• Dual THHN / THWN-2 Conductor Insulation: Inner copper conductors are wrapped in high-dielectric PVC and topped with a rugged clear nylon skin. This dual-layer architecture ensures superior resistance to oil, gasoline, moisture, and insulation scraping during difficult installations.

• Direct Burial & Sunlight Resistant: Protected by an extruded, flame-retardant outer PVC jacket that forms an impermeable barrier against harsh ambient conditions, making it safe for open-air tray runs, direct burial trenching, or wet environments.

• Highly Conductive Bare Copper: Manufactured with high-purity, soft-annealed stranded bare copper conductors to deliver optimal electrical conductivity, minimal line resistance, and sufficient physical flexibility for long pulled runs.

• Rigorous Industrial Flame Ratings: Engineered to prevent the migration of fire across open structural paths, fully certified to pass the demanding IEEE 1202 / UL 1685 vertical tray flame tests.

Common Applications

• High-Leg Delta Power Networks: Routing branch power circuits from a high-leg delta transformer bank, with the orange conductor serving as the dedicated high-voltage phase leg.

• Multi-Wire Industrial Control Loops: Supplying continuous power and command legs alongside standard three-phase ungrounded power paths within automated production assemblies.

• Industrial Machinery Feeders: Supplying clean branch power to automated CNC equipment rows, motor control centers (MCCs), and multi-stage process relays.

• Utility Feeder & Branch Distribution: Pulling branch infrastructure connections through structural conduits, commercial utility tunnels, underground duct banks, or open-air wire mesh trays.

• Hazardous Environment Deployment: Approved under strict National Electrical Code provisions for installation within Class I, Division 2 hazardous industrial locations.

Circuit Identification: Black/Red/Blue/Orange Color Code

• Conductor 1: Black Insulation (Phase A / Line 1)

• Conductor 2: Red Insulation (Phase B / Line 2)

• Conductor 3: Blue Insulation (Phase C / Line 3)

• Conductor 4: Orange Insulation (High-Leg / Specialized Ungrounded Phase Leg)

• Note: Surface tracking information is continuously printed on the black outer PVC jacket for compliance auditing.

Technical Specifications

• Conductor Size: 10 AWG

• Number of Wires: 4

• Cable Geometry: Round (Twisted Core)

• Conductor Type: Stranded Bare Copper

• Insulation Material: PVC with Nylon Skin (THHN/THWN-2)

• Jacket Material: PVC (Polyvinyl Chloride) - Black

• Voltage Rating: 600 Volts RMS

• Maximum Temperature Rating: 90°C Dry / 90°C Wet Continuous Operating

• Flame Test Ratings: IEEE 1202, UL 1685 Vertical Tray Flame Test, FT4

• Compliance Standards: UL 1277 (Type TC), NEC Article 336, Type THHN/THWN-2 Conductors, RoHS Compliant

Technical Note: When engineering layouts with 10 AWG 4-conductor VNTC tray cable, installers must apply ampacity adjustment factors per NEC Article 310.15(C)(1) if all four conductors are considered current-carrying. Under conditions where more than three conductors carry active continuous current, the bundle must be derated to 80% of its 90°C ampacity baseline (40 Amps × 0.80 = 32 Amps).

Additionally, the installer must account for the NEC "Small Conductor" rule (NEC 240.4(D)), which mandates that the standard maximum overcurrent protection device (the circuit breaker) for a 10 AWG conductor cannot exceed 30 Amps under standard branch circuit parameters.

CABLE TYPE: 10 AWG / 4-Conductor Stranded Round THHN/PVC Type TC Tray Cable (Black/Red/Blue/Orange, No Ground)

DISCLAIMER: The technical information provided is for general reference only. Large-scale industrial power distribution paths, high-leg transformer layouts, and machinery connections must strictly adhere to the National Electrical Code (NEC), local building structures, and relevant industrial safety parameters. Always cross-reference the official product submittal data sheet from the chosen manufacturer prior to finalizing physical system designs or cutting structural cable lengths.

General Shipping Information

In-stock orders placed before 3pm EST typically ship within 1-2 business days. Our business days are Monday through Friday; we do not process orders on Saturday, Sunday, or major US Holidays.

You will receive an e-mail with a tracking number within 1-2 business days from the time its shipped. You will also be able to view your order status and tracking numbers in your account order history.

Expedited Shipping

Expedited shipments are delivered Monday-Friday except on US Holidays. The order must be placed before 12pm CST to ship same day ( Mon-Fri Only).

Returns

You have 30 days from the day you receive the item to contact us for a return. Returns are subject to a 30% Restocking Fee.

Please contact us at help@wireamerica.com to request a return authorization. Have your order number or name the order was placed with ready and we will email you an RMA (return) number and instructions for return. Currently, we do not offer exchanges. A new order must be placed if you need a different item. If you provide the new order number at the time of your return request, the restocking fee may be lowered.

Orders on any items with a material value of $50 or less are non-returnable.