MOBILE HOME FEEDER CABLE

Aluminum Mobile Home Feeder Cable is purpose-built as the main electrical connection, or service entrance cable, for mobile homes. This robust cable is designed to withstand sunlight exposure and is approved by the National Electrical Code for installation in raceways or even for direct burial. It's rated for safe operation in both wet and dry environments, with a maximum temperature of 90°C (194°F) and a 600-volt rating. Read our Aluminum Mobile Home Feeder Cable Buyers Guide.

Filters

0 Products

FIlters

Mobile Home Feeder (MHF) Cable

Mobile Home Feeder (MHF) cable is a heavy-duty underground service entrance cable designed specifically to deliver power from a secondary electrical disconnect to the main distribution panel in mobile and manufactured homes. Consisting of four quadruplexed conductors—two phase-insulated lines, one identified neutral, and one grounding conductor—this cable is built with high-strength 1350-H19 aluminum alloy. The conductors are insulated with a thick layer of Cross-Linked Polyethylene (XLPE), providing exceptional resistance to moisture, heat, and mechanical damage. Rated for 600V and suitable for direct burial, MHF cable ensures a reliable and code-compliant power connection that can withstand the rigors of long-term underground installation.

Key Features
  • Quadruplexed Construction: Features four individual conductors twisted together for a complete power and grounding solution in a single pull.
  • Direct Burial Rated: Engineered for installation directly in the earth or within a conduit system without the need for additional protection.
  • Rugged XLPE Insulation: Each conductor is shielded by sunlight-resistant cross-linked polyethylene, rated for 90°C in both wet and dry environments.
  • Corrosion-Resistant Aluminum: Utilizes 1350-H19 series aluminum for a lightweight yet highly conductive and cost-effective power solution.
  • NEC Compliance: Manufactured to meet UL Standard 854 and is fully compliant with National Electrical Code (NEC) requirements for mobile home park services.
Common Applications
  • Service Entrance Feeders: The primary choice for connecting a mobile home's main electrical panel to an outdoor service pedestal.
  • Manufactured Housing Power: Designed specifically for the unique wiring requirements of modular and manufactured residential units.
  • Mobile Home Park Infrastructure: Used by developers to run secondary power from transformers to individual lot disconnects.
  • Temporary Housing Power: Frequently deployed in disaster relief or construction sites for semi-permanent housing power distribution.
  • Underground Secondary Services: Suitable for various 600V underground applications where a 4-wire configuration is required.
  • Sub-Panel Distribution: Ideal for feeding power to detached outbuildings or sheds that require a dedicated ground and neutral.
  • Agricultural Service Runs: Used in farming environments for powering remote utility poles or well-pump control centers.
Installation Note
  • Aluminum URD is optimized for outdoor underground use. If your project requires running wire inside a building, ensure you transition to a code-compliant indoor wire like SER or MHF.

Resources & Guides

Category_Buying Guide
What is Mobile Home Feeder Cable?
November 20, 2025
Read More
Category_Buying Guide
What is Aluminum URD Direct Burial Cable?
November 19, 2025
Read More
Category_Buying Guide
Why Aluminum Wire?
October 31, 2025
Read More