{"product_id":"500-mcm-3c-5kv-133-prysmian-airguard-mv-105-cable","title":"500 MCM 3C Prysmian Airguard™ 5kV 133% MV-105 Power Cable","description":"\u003cstrong\u003eAPPLICATION:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePrysmian’s patented AIRGUARD cable\u003c\/strong\u003e is a direct replacement for continuously corrugated and welded aluminum armored cables (*in Class 1 Div 2 locations) with 5X the impact performance and up to 3X the sidewall bearing pressure limit (at 3000 lbs per rad-ft) This enables longer pulls than with CCW type cables.Three conductor cable with stranded copper conductors, extruded insulation system consisting of a thermosetting semiconducting conductor shield, high dielectric strength EPROTENAX™ EPR insulation, thermosetting semiconducting insulation shield, helically applied bare copper tape shield, cabled with fillers and grounding conductors, overall binder tape, foamed polymeric AIR BAG™layer for superior mechanical protection, longitudinally applied aluminum tape, extruded oil and hydrocarbon resistant polymeric DRYLAM™ layer, and overall sunlight resistant PVC jacket. Suitable for Class I Division 2 locations.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCONDUCTORS:\u003c\/strong\u003e\u003cbr\u003eClass B Compact concentric strand soft drawn annealed copper per ASTM.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCONDUCTOR SHIELD:\u003c\/strong\u003e\u003cbr\u003eExtruded thermosetting semiconducting shield which is free stripping from the conductor and bonded to the insulation.\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003eINSULATION:\u003c\/strong\u003e\u003cbr\u003eNatural high dielectric strength EPROTENAX™ EPR-based insulation, combined with other materials and agents that enhance the electrical and mechanical characteristics assuring extended cable life.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eINSULATION SHIELD:\u003cbr\u003e\u003c\/strong\u003eExtruded thermosetting semiconducting shield with controlled adhesion to the insulation providing the required balance between electrical integrity and ease of stripping.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMETALLIC SHIELD:\u003cbr\u003e\u003c\/strong\u003eHelically applied non-magnetic copper tape(s) over the insulation shield with a nominal overlap of 25%. A mylar ribbon is longitudinally applied under the copper tape shield for phase identification - 1C w\/ Red, 1C w\/ Blue, and 1C w\/ Black.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGROUNDING CONDUCTORS:\u003cbr\u003e\u003c\/strong\u003eBare stranded copper conductor per UL, ICEA, and ASTM.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eASSEMBLY:\u003cbr\u003e\u003c\/strong\u003ePhase identified conductors cabled with fillers and grounding conductors, forming a firm and cylindrical cable core. A binder tape is applied to maintain core symmetry and mechanical stability.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMECHANICAL PROTECTION:\u003cbr\u003e\u003c\/strong\u003eHigh strength and high crush resistant AIR BAG layer extruded over the core assembly.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCHEMICAL PROTECTION:\u003cbr\u003e\u003c\/strong\u003eA layer of DRYLAM™ which consists of a 6mil longitudinally applied aluminum tape and a chemical resistant extruded polymer layer is applied.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJACKET:\u003cbr\u003e\u003c\/strong\u003eBlack jacket of linear lows density polyethylene (LLDPE), which is sunlight, abrasion and heat resistant. The jacket has 3 red stripes, the NESC lightning bolt and sequential footage markings.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGROUND WIRES:\u003cbr\u003e\u003c\/strong\u003e3 - #5\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAMP RATINGS:\u003c\/strong\u003e\u003cbr\u003eIn Air \/ Tray @ 105°C - \u003cstrong\u003e600 Amps\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIn Duct @ 105°C - \u003cstrong\u003e485 Amps\u003cbr\u003e\u003cbr\u003eMinimum Bending Radius:\u003cbr\u003e\u003c\/strong\u003e20 in.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImpedance:\u003cbr\u003e\u003c\/strong\u003ePos\/Neg Seq -  \u003cstrong\u003e   29 + j31\u003cbr\u003e\u003c\/strong\u003eZero Seq -  \u003cstrong\u003e 548 + j15\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Wire America","offers":[{"title":"250 ft. Spool","offer_id":53036390285626,"sku":"PAGMV105-5KEPR-500-250","price":0.0,"currency_code":"USD","in_stock":true},{"title":"500 ft. Spool","offer_id":53036390318394,"sku":"PAGMV105-5KEPR-500-500","price":0.0,"currency_code":"USD","in_stock":true},{"title":"1000 ft. Spool","offer_id":53036390351162,"sku":"PAGMV105-5KEPR-500-1K","price":0.0,"currency_code":"USD","in_stock":true},{"title":"2500 ft. Spool","offer_id":53036390383930,"sku":"PAGMV105-5KEPR-500-2500","price":0.0,"currency_code":"USD","in_stock":true},{"title":"By the Foot","offer_id":53036390416698,"sku":"PAGMV105-5KEPR-500-FT","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/0234\/9114\/files\/prysmian-airguard-500-mcm-3c-5kv-mv105-armored-power-cable.jpg?v=1771451060","url":"https:\/\/www.wireamerica.com\/products\/500-mcm-3c-5kv-133-prysmian-airguard-mv-105-cable","provider":"Wire America ","version":"1.0","type":"link"}